Hi all,can someone explain me how to Setup the router for a PPPoE FTTH Connection with IPV6 Dual Stack Lite (DS-Lite) ?I have put in the IPV6 Login credentials for pppoe, get an IPv6 Adress , can open IPv6 Internet sites but no IPv4 adresses .How can i define the Dual Stack Lite (DS-Lite) for the IPv4?Kind regaards, Carsten

Which Netgear device are you using? There are several "x4s" devices. What are you trying to do?

I use the Netgear Nighthawk X4S AC2600 Smart Wifi Router Model: 7800, newest Firmware.The Router worked well for the pur IPv4 login.I put in the login credentials for a pppoe IPV6 login, get an IPv6 Address, but no IPv4 Adress entry for the DS-Lite.

Carsten_R wrote:I use the Netgear Nighthawk X4S AC2600 Smart Wifi Router Model: 7800, newest Firmware.The Router worked well for the pur IPv4 login.I put in the login credentials for a pppoe IPV6 login, get an IPv6 Address, but no IPv4 Adress entry for the DS-Lite.What specific version of firmware do your have installed? The "newest" does not allow confirmation as their may be other versions. In the configuration of your router, under Advanced -> Advanced Setup -> IPv6 do you have IPv6 enabled? When enabled, there is a drop down menu that sets the connection type. PPPoE is one of the options.

Here are some screenshots, I hope it helps.When he is connected he shows two IPv6 Adresses but no Infos about IPv4

Carsten_R wrote:Here are some screenshots, I hope it helps.When he is connected he shows two IPv6 Adresses but no Infos about IPv4 I cannot see inserted images until after a moderator approves them. If you attach the file (different from inserting), one file per message, then I can see them. What happens when you check your IP here: https://whatismyipaddress.com/

Nighthawk x4s -IPV6 Dual Stack Lite (DS-Lite)

16 Replies

michaelkenward
Guru - Experienced User
Jan 21, 2023
Which Netgear device are you using?

There are several "x4s" devices.

What are you trying to do?
- Carsten_R
  Aspirant
  Jan 22, 2023
  I use the Netgear Nighthawk X4S AC2600 Smart Wifi Router Model: 7800, newest Firmware.
  
  The Router worked well for the pur IPv4 login.
  I put in the login credentials for a pppoe IPV6 login, get an IPv6 Address, but no IPv4 Adress entry for the DS-Lite.
  - Kitsap
    Master
    Jan 22, 2023
    Carsten_R wrote:
    I use the Netgear Nighthawk X4S AC2600 Smart Wifi Router Model: 7800, newest Firmware.
    
    The Router worked well for the pur IPv4 login.
    I put in the login credentials for a pppoe IPV6 login, get an IPv6 Address, but no IPv4 Adress entry for the DS-Lite.
    What specific version of firmware do your have installed? The "newest" does not allow confirmation as their may be other versions.
    
    In the configuration of your router, under Advanced -> Advanced Setup -> IPv6 do you have IPv6 enabled? When enabled, there is a drop down menu that sets the connection type. PPPoE is one of the options.

Forum Discussion

Nighthawk x4s -IPV6 Dual Stack Lite (DS-Lite)