NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Only power light is on
Hey all. Happy New Year's. I was wondering if anybody knew or had a similar experience. For my extender, I only have the power light on. None of the other lights are on meaning nothing else works. Thanks for the support.
4 Replies
what color is that power light?
have you tried a factory reset? Push and hold reset for 7-15 seconds while powered on
If that doesn't help, it could be corrupt.
You can try recoving it with tftp or nmrpflash.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.
https://www.youtube.com/watch?v=R9DLrLQrpaw
and if that doesn't work, you can try using nmrpflash
https://github.com/jclehner/nmrpflash- The power light is a steady green light. I'll try those options you gave me. I use my phone for setup.
If the factory reset doesn't work, start with trying to hardwire a pc/laptop into the extender first.
factory reset: push and hold reset for 7-15 seconds while powered on. The lights should blink/change when held long enough.
disable the laptop/pc's wireless. then connect it and try to access the mywifiext . net or its default 192.168.1.250
