R7450 Power light blinking after

Question

I was trying to update the firmware on my router and my ISP signal dropped in the middle of it. Now I have that blinking white power light. I have tried the TFTP, but I do not get the pop up box that is described in the directions. I have attached a photo of what my screen looks like after I have followed the steps.

plemans · Answer

are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
&nbsp;
just make sure you enable tftp&nbsp;
https://www.thewindowsclub.com/enable-tftp-windows-10
&nbsp;
and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.&nbsp;
https://www.youtube.com/watch?v=R9DLrLQrpaw
&nbsp;
and if that doesn't work, you can try using nmrpflash
https://github.com/jclehner/nmrpflash

tecee21 · Answer

plemans&nbsp;sorry that it took me so long to respond. None of the tftp stuff has work, could you give me some insight as to how to do the nmrpflash. Thanks in advance for your help.

plemans · Answer

it has instructions on it that walk you through pretty much the whole thing as well as troubleshooting. where are you failing in the process?

tecee21 · Answer

plemans&nbsp;so whenever I try to run the nmrpflash this is what I get....

tecee21 · Answer

Don't know why the photo didn't come through, I attached it to this message.

Forum Discussion

R7450 Power light blinking after

8 Replies