NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
X4S File copied over the network fail MD5 checksum and are corrupted
I have the X4S configured as an access point. I have a PC connected to the X4S via ethernet cable. Files copied over the network consistently fail MD5 checksum. I've searched and found a related post with no resolution, other than configuring the router as a normal router and not as an AP which is not a fix but a workaround and I need the AP configuration. Link to previous thread
I'm running the latest firmware v1.0.1.52.
I replaced the router and all files copied are without error, so it is definitely a problem with the router. Very frustrated as I'm having to go back and restore backups due to the corrupted files but not everything was backed up.
by the way for a test you just need to disconnect you cable from internet port and to attach it to the internet port. two seconds. and i beat you will not have such md5sum problems anymore.
10 Replies
TBy wrote:
I have the X4S configured as an access point. I have a PC connected to the X4S via ethernet cable. Files copied over the network consistently fail MD5 checksum. I've searched and found a related post with no resolution, other than configuring the router as a normal router and not as an AP which is not a fix but a workaround and I need the AP configuration. Link to previous thread
I'm running the latest firmware v1.0.1.52.
I replaced the router and all files copied are without error, so it is definitely a problem with the router. Very frustrated as I'm having to go back and restore backups due to the corrupted files but not everything was backed up.
you have to use the only lan ports if your router is in ap mode. no wan port. i guess you are using wan so it is a reason.
The manual states to connect the X4S Internet port to the LAN port of the other router which is how it is/was configured. I take it the "Internet" port is what you reference by "WAN" port. Is there reference that your method should work?
TBy wrote:
The manual states to connect the X4S Internet port to the LAN port of the other router which is how it is/was configured. I take it the "Internet" port is what you reference by "WAN" port. Is there reference that your method should work?
Maybe the error is in the manual. Would it be reasonable to use the second configuration and run a test?
