NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
After upgrade Transmission addon doesn't work
Hi,
I changed hard drives in my NAS storage, now I have two hdds in this default flexible raid. The problem is before upgrade Tramission was working properly, and after upgrade the site open an...
Can you check that the system can reach the internet? One way to do that is to download the log zip file, and search for NTP - which syncs the time on the NAS with an internet time server.
Also, if you use port forwarding in your router, you should make sure it is forwarding to the correct IP address - that might have changed when you did the factory reset.
Can you check that the system can reach the internet? One way to do that is to download the log zip file, and search for NTP - which syncs the time on the NAS with an internet time server.
Also, if you use port forwarding in your router, you should make sure it is forwarding to the correct IP address - that might have changed when you did the factory reset.
Thank you very much! I haven't thought even that device may not had internet, and I had manual settings and IP address was ok but somehow default gateway ip dissapered and that was the reason. Thank again.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
