NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Duo v1 + 4.1.13 + APC UPS
Hi,
I have an APC UPS Backup ES 700VA. It's connected only to a Netgear ReadyNAS Duo v1, nothing else is connected to the UPS.
But now when the NAS is running (not asleep) the UPS beeps every say 15minutes for about 10 seconds. I have tried connecting the UPS to my PC via USB and installing the PowerChute software but then the beeps do not occur and the software says the UPS is fine. The UPS is 3yrs and 3 months old. APC have recommended a new battery.
Frontview reads "APC Back-UPS ES 700G, Battery charge: 100%, 61 minutes" - so the NAS seems happy and it does not report any problems in the logs.
But I can't help but wonder if it's the new ReadyNas firmware, as I can't remember if this occured before I upgraded this week to 4.1.13 - could just be co-incidence.
Anybody come across this problem, or got issues with the new firmware?
Thanks
Daniel
I have an APC UPS Backup ES 700VA. It's connected only to a Netgear ReadyNAS Duo v1, nothing else is connected to the UPS.
But now when the NAS is running (not asleep) the UPS beeps every say 15minutes for about 10 seconds. I have tried connecting the UPS to my PC via USB and installing the PowerChute software but then the beeps do not occur and the software says the UPS is fine. The UPS is 3yrs and 3 months old. APC have recommended a new battery.
Frontview reads "APC Back-UPS ES 700G, Battery charge: 100%, 61 minutes" - so the NAS seems happy and it does not report any problems in the logs.
But I can't help but wonder if it's the new ReadyNas firmware, as I can't remember if this occured before I upgraded this week to 4.1.13 - could just be co-incidence.
Anybody come across this problem, or got issues with the new firmware?
Thanks
Daniel
3 Replies
- I am not sure I totally understand the facts here.
(a) when the duo power is connected to the UPS, and the USB is totally disconnected, are you hearing beeps?
(b) when the USB is connected to the PC, do you still have the Duo power connected to the UPS? - Sorry, it is confusing.
a). That's right I don't hear any beeps. I didn't totally disconnect the USB socket as I had it connected to the PC to monitor it on PowerChute.
b). Yes, I still had the UPS powering just the NAS.
I do have another APC 400 I could test on, but that does not have the USB socket.
Thanks - It seems unlikely to be the battery if the disconnecting the USB from the NAS makes the beeps disappear.
Maybe downgrade the NAS firmware, and see if the problem disappears. What were you running before?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
