NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
LCD Display Dead - ReadyNAS Pro Business
Hi Folks, Has anyone else had a problem with the OELD Display malfunctioning on the ReadyNAS Pro Business Edition (RNDP6310)? Could this be an incompatibility with the latest firmware? Does anyon...
Is it still under warranty?
Are you running 4.2.27?
I have not heard of this problem on the forums.
What exactly is happening? Nothing on the display at all, that sounds like a hardware problem.
You could , just to be sure, power down, remove all your disks ( label them) insert a spare disk and factory default the unit. if the problem persists then it's almost certainly hardware.
4.2.26 is at the link below, but it's unlikely to make a difference, if you are planning to install that then I'd do an OS reinstall first, ( assuming you are running 4.2.27)
http://kb.netgear.com/app/answers/detai ... /related/1
Are you running 4.2.27?
I have not heard of this problem on the forums.
What exactly is happening? Nothing on the display at all, that sounds like a hardware problem.
You could , just to be sure, power down, remove all your disks ( label them) insert a spare disk and factory default the unit. if the problem persists then it's almost certainly hardware.
4.2.26 is at the link below, but it's unlikely to make a difference, if you are planning to install that then I'd do an OS reinstall first, ( assuming you are running 4.2.27)
http://kb.netgear.com/app/answers/detai ... /related/1
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
