MRTG config info

Well, after following Saxofon's instructions, and a little tweaking I was able to get the info I needed on my ReadyNas. Here is what the NAS section of my MRTG.CFG file looks like:

######################################################################
# System: ReadyNAS
# Description: Linux ReadyNAS 2.4.20-3.00c1.0 Wed Nov 29 15:20:42 PST 2006 sparc
# Contact: root
# Location: Unknown
######################################################################

SingleRequest: Yes
Directory[_]: NAS

Target[raid1_eth]: 3:public@192.168.0.2
MaxBytes[raid1_eth]: 1250000000
Title[raid1_eth]: ReadyNAS GigaBit Eth0
PageTop[raid1_eth]: <H1>ReadyNAS Gigait Eth0</H1>

Target[raid1_fan]: .1.3.6.1.4.1.11500.1.4.1.2.0&.1.3.6.1.4.1.11500.1.4.1.2.0:public@192.168.0.2
Options[raid1_fan]: growright, gauge, nopercent, noo
MaxBytes[raid1_fan]: 5000
Title[raid1_fan]: ReadyNAS Fan Speed
PageTop[raid1_fan]: <H1>ReadyNAS Fan Speed</H1>
YLegend[raid1_fan]: RPMS
ShortLegend[raid1_fan]: RPMS
LegendI[raid1_fan]: Rear fan
WithPeak[raid1_fan]: ymwd

Target[raid1_temp]: .1.3.6.1.4.1.11500.1.5.1.2.0&.1.3.6.1.4.1.11500.1.5.1.2.0:public@192.168.0.2
Options[raid1_temp]: growright, gauge, nopercent, noo
MaxBytes[raid1_temp]: 50
Title[raid1_temp]: ReadyNAS Temperature
PageTop[raid1_temp]: <H1>ReadyNAS Temperature</H1>
YLegend[raid1_temp]: C
ShortLegend[raid1_temp]: C
LegendI[raid1_temp]: Temp
WithPeak[raid1_temp]: ymwd

I couldn't get the volume bit to work - but don't really need this. I am also interested in getting the CPU load - Does anyone know how to go about getting the numeric SNMP variable for CPU load? How do you find out any of the SNMP variables?

Does anyone else know of any other interesting things to monitor on the ReadyNAS?

Thanks for the help Saxofon :)