NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
No boot only telnet with USB recovery
Dear all, I am writing to ask you for advice, as a last resort, before throwing away my nas. It is a 2-Bay RN102 - ReadyNAS 100, that does not start. It is not reachable from RAIDAR. I have attemp...
Thanks for you suggestions. But the raidar screenshot is really the only status I can get from it.
I consider my RN102 bricked and will be looking for a replacement.
I updated the RN104 firmware with web interface to 6.10.10
After the update the device will not boot any more and says USB recovery.
I made the USB recovery memory stick as suggested by manual.
Now I am able to access the unit with telnet.
I do not know any commands for restore.
Got if fixed. I added also ReadyNASOS-6.10.10-arm.img to the memory stick. Then it did the update and shut down but still no boot.
I tried with ReadyNASOS-6.10.9-arm.img
then ReadyNASOS-6.10.8-arm.img
then ReadyNASOS-6.10.7-arm.img
After that I removed the img file from memory stick and tried again.
After that there was displayed FW update. Then with next reboot the bars progressed with staying long on 98% and the disks rattled until it finally boots to FW 6.10.10
Web interface shows Firmware 6.10.10
Files are acessible, seems that the issue is fixed.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
