NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NV+ cannot connect to UPS on 316
I have installed a new UPS. I now want my NV+ to monitor the UPS that is connected to my 316. "Enable network monitoring of attached UPS" is ticked. The UPS status is OK. The 316 and NV+ are connec...
This works fine with my RN102 and my NV+ RN102 is running 6.2.4, NV+ is running 4.1.15-T3
"Enable network monitoring of attached UPS" is ticked on the RN102.
"Enable monitoring of UPS physically attached to a remote ReadyNAS" ticked, with RN102 IP address entered on the NV+
So this is the same as your setup :?
Did you try clearing the settings, rebooting both NAS and setting up again?
"Enable network monitoring of attached UPS" is ticked on the RN102.
"Enable monitoring of UPS physically attached to a remote ReadyNAS" ticked, with RN102 IP address entered on the NV+
So this is the same as your setup :?
Did you try clearing the settings, rebooting both NAS and setting up again?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
