NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Power On ReadNAS 422 and reboots...
Hello all, Power On my RN422 and after 30 seconds it reboots and then fully boots up. Also have a RN524 doing the same but after two reboot it fully boots up. Other then that they both work fine....
Thank but the logs show no errors.... 🤔
FerociousNAS wrote:
Thank but the logs show no errors.... 🤔
You should be seeing something in the log zip around the time of the second reboot.
FWIW, I am not seeing this behavior in my own ReadyNAS.
ok I got the zip log file this time.... Looked at the dmes.log. Not really sure what I'm looking for? 🤔
How are you shutting down the NAS?
The errors in dmesg indicate that the volume is resyncing and also that the usb drive was not properly unmounted. So I am wondering if you doing a clean shutdown when you power down the NAS.
Issue seems to be resolved. I replaced the dead CMOS CR2032 battery and let the HDD sync up. Unplugged the power and flushed the flee power by holding down the power button for 10 sec, plugged power brick pack in and started up w/o the multiple reboots. I will leave it unplugged for a few hrs and report back.
Thanks for the help! 🙂
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
