Read Nas 104 supports ReadyDr

Question

Read Nas 104 Firmware 6.10.3 supports ReadyDr As I do not have the Ready Dr Option

StephenB · Answer

psailast&nbsp;wrote:
&nbsp;what shall I do to continue to keep a back a clone of Readynas being that my ReadyDr is not supported on my systems

You could switch to rsync-over-ssh, and enable custom snapshots on the destination NAS to give you some rollback/retention.

JohnCM_S · Answer

Hi&nbsp;psailast,

&nbsp;

ReadyDR is not available on the RN10x series and RN2120. You may also check this article for reference.

&nbsp;

Regards,

psailast · Answer

I have Ready Nas 104 I ReadyNas replicate to keep date on another ReadyNas 104 off site as a data recovery plan just in case I lose of the the Ready Nas. Being that Ready Nas replicate would no longer be avaliable after October 2020 what I shall is do to continue to keep a back a clone of Readynas being that my ReadyDr is not supported on my systems

psailast · Answer

I am try to set the&nbsp;rsync-over-ssh what should i include under the host the ISP IP address wherr the other NAS is located? I am having the attached error&nbsp;

StephenB · Answer

Generally you'd set up DDNS on the remote system, so you can use a hostname that will track the WAN address of the remote router (which generally will change without notice).
&nbsp;
Many Netgear routers have a built-in DDNS service you can use (getting a name like psailist.mynetgear.com.&nbsp; NoIP.com has a free DDNS option, along with paid options.
&nbsp;
Most routers will support DDNS.&nbsp; If yours doesn't, you can also install software on a PC that connects to the DDNS service, and periodically refreshes the DDNS IP address.
&nbsp;
You also will need to forward the port you are using for rsync-over-ssh in the remote router.

Forum Discussion

Read Nas 104 supports ReadyDr

10 Replies

Related Content

ReadyDR Error 255

ReadyDR Not Working

ReadyDR Setup HELP!!

Where is ReadyDR

ReadyDR is gone.

NETGEAR Academy

ProSupport for Business