- Disk usage is reported incorrectly by GUI- Disk usage graph is not reported correctly and does not match incorrecly or correclty reported actual usage number.- Alert email configuration can not be changed after installation. Not sure where it gets the address or mail type from??? Does not work due to incorrect information. No way to "Save" changes.- Multiple backups show "in progress". Only one backup should ever be "in progress" at a time.- NFS performance was terrible until I manually added "async" to the nfs export, but new shares are performing well now without the addtion. Not sure if reboots solved the problem?- Edits to backup source or destination causes GUI to show plain text password and corrupted field entries.- Backup schedule does not work. All backups are run starting at midnight.

Is this with 6.0.8?I staggered my backup start times a few releases ago, and at that point the backups started at the time I set.Also I am confused on the disk usage comment. On my RN102, the GUI ties out perfectly with df

df is also incorrect. I created the exact same shares that were on my other ReadyNAS DUO V1 and rsync'd them. The size reported on the 102 is double. Why?Adding to the list of bugs...- If there is a network outage, any scheduled backups will be frozen in the in progress state.

mrd wrote:df is also incorrect. I created the exact same shares that were on my other ReadyNAS DUO V1 and rsync'd them. The size reported on the 102 is double. Why?I'm not convinced df is incorrect. Not sure that is even possible w/o a corrupt file system.In any event, I am not seeing this. Space reported in my shares (via windows) is exactly the same on my RN102 backup and the Pro. du . -S gives the same answer. Total space is consistent - and certainly it is not a factor of 2 off. That would put more stuff on the disk than it can hold.I am wondering if the missing space is in your snapshots. Try deleting the snapshots and try again. You could also try scrubbing the volumes.mrd wrote:If there is a network outage, any scheduled backups will be frozen in the in progress state.Can you clarify this a bit? Do you mean that if there is a network outage while a backup in running, that the backup never completes? Or that there is a bug in the reporting?

Suppose you configure Power timer to shut down at 01:00 am.If you do a data transfer between your pc and readynas, when the time for shut down comes the nas, begins a shut down proccedure witout any notice orask for shut own confirmation.At SMB when i try to reach the readynas using windows networking, some times, my pc does' not see the readynas at once and need to redo the steps.As for the wrong disk usage indication, when i delete a big amount of data, the gauge dows not subtructi the deleted amount to show the new usage.

pantatechnics wrote:Suppose you configure Power timer to shut down at 01:00 am.If you do a data transfer between your pc and readynas, when the time for shut down comes the nas, begins a shut down proccedure witout any notice orask for shut own confirmationIt might be possible to have an power setting that says "shut the system down at time X but if the disks are active wait until they have been inactive for M minutes". But I don't see how the NAS could ask for user confirmation on your PC when you are using SMB. Or FTP, DLNA, iTunes Server, AFP, NFS, etc. There is no mechanism for it to use. If you want to reduce power usage while leaving the NAS available, then why not use "enable disk spin-down"? pantatechnics wrote:...As for the wrong disk usage indication, when i delete a big amount of data, the gauge dows not subtructi the deleted amount to show the new usage.By default the RN102 has snapshots enabled. Any deleted files are shifted to the snapshot (so no space is freed up).

ReadyNAS 102 Bug list. | NETGEAR Communities

23 Replies

Replies have been turned off for this discussion

pantatechnics
Aspirant
Oct 16, 2013
Firmware version : 6.1.3
I enabled the Antivirus real time scan & configured some squeduled scans after midnight when the nas is idle.
A Netgear enginnear suggested me not to use the real time antivirus because the rn102 data transfer slows down,
so i dissabled the real time scan, but the squeduled scans dissabled too.
The squeduled scans (if configured, must be kept enabled even if the real time protection is dissabled.

Hope the new firmware correct this.
pantatechnics
Aspirant
Oct 21, 2013
I made a backup job.
This job copy data from a shared folder at my Pc to a share at my readynas Rn102.

After the backup finished successfully the backup panel still display this job "In Progress"

This is a 6.1.3 bug

PS.
Lately I don't see others have problems or report bugs.
Am i the one i have all these bugs ?
:?
Mindjogger
Aspirant
Oct 28, 2013
RN102 does not play any movie.

Support chat told me, this is a HW limitation.
Only possible with 300 or 500.
Chat:
Start was: I can not play any movie via the Plex

Rene: Anyway it seems that this has already been raised and we have an answer about it.
Rene: The RN102 does not support transcoding.
Rene: It only starts with RN300 series and 500 series.
Rene: So this is more like a hardware limitation.
Me: This is not a good news.
Rene: You may need to upgrade to another unit if you want HD movies be read.
Rene: Like an RN30200.
StephenB
Guru - Experienced User
Oct 28, 2013
Well you can play HD movies with Plex on the 102, as long as they don't require transcoding.

Can you post (or pm) the mediainfo for one of the movies that fails? (www.videohelp.com/tools/mediainfo)

pantatechnics

Aspirant

Nov 20, 2013

Mindjogger wrote:
RN102 does not play any movie.

Rene: The RN102 does not support transcoding.
Rene: It only starts with RN300 series and 500 series.
Rene: So this is more like a hardware limitation.
Me: This is not a good news.
Rene: You may need to upgrade to another unit if you want HD movies be read.
Rene: Like an RN30200.

Mindjogger wrote:
RN102 does not play any movie. Rene: The RN102 does not support transcoding. Rene: It only starts with RN300 series and 500 series. Rene: So this is more like a hardware limitation. Me: This is not a good news. Rene: You may need to upgrade to another unit if you want HD movies be read. Rene: Like an RN30200.

Well this is not an answear from a Netgear representative.
Why netgear produse a new series product like RN102 which is not support movie transcoding ?
It had to had the right hardware to do so.
Why i have to Upgrade ? To pay more money for another unit ?
I had a Zyxel NAS before and i had not any kind of such issues.
It is unbeleaveable to read a suggestion like " You may need to upgrade to another unit if you want HD movies be read"
The RN102 is a product of the latest range of Netgear Nas...

It is a shame for netgear as a company....

pantatechnics
Aspirant
Nov 20, 2013
I have to mention a new bug at version 6.1.4.

I recently do a defragmentation, at my RN102, after some time, it lost the connection with my pc and can not reconnect.
To connect again i must cut the power and replug again. After the connection lost i can not shut down my nas only if unplug the power.
The first time i did this when it powered on it did a volune rebuild.

I tried to defrag second time with the same resault... :(
praveenverghese
Aspirant
Dec 05, 2013
I have the same issue with defrag. The NAS device hangs after an hour of defragmentation process. Had reported it to netgear support, they asked me to re-install the OS, did that and the problem still persists, its definitely a bug with version 6.1.4

-Praveen
praveenverghese
Aspirant
May 02, 2014
defrag issue is now fixed with firmware 6.1.7
mrd
Aspirant
Aug 15, 2014
I started this thread quite some time ago and now I made the unfortunate descision to buy another 102, hoping that things had gotten better. :?
They haven't.

I can't get NFS to work at all and rsync won't allow me to enable the password option on each share.
I've posted about the rsnc problem elsewhere, but maybe someone knows how to get NFS to work?
I've tried all of the things that used to work find on the Duo and also added the /data to the path.

Thanks!
mrd
Aspirant
Aug 15, 2014
FYI... showmount takes over 3 minutes.
root@mrd-ThinkPad-T520:~# time showmount -e 10.10.55.224
Export list for 10.10.55.224:
/run/nfs4/data *
/run/nfs4/home *
/home *
/run/nfs4 *
/data/Shared_Media_Files 127.0.0.1
/run/nfs4/data/Shared_Media_Files 127.0.0.1
/data/MRD_FILES (everyone)
/run/nfs4/data/MRD_FILES (everyone)
/data/Media 127.0.0.1
/run/nfs4/data/Media 127.0.0.1
/data/KLD_FILES 127.0.0.1
/run/nfs4/data/KLD_FILES 127.0.0.1
/data/JFD_FILES 127.0.0.1
/run/nfs4/data/JFD_FILES 127.0.0.1
/data/CSA_FILES 127.0.0.1
/run/nfs4/data/CSA_FILES 127.0.0.1

real 3m9.352s
user 0m0.000s
sys 0m0.004s
root@mrd-ThinkPad-T520:~#

Forum Discussion

ReadyNAS 102 Bug list.

23 Replies

Related Content

ReadyNAS 102 / OS6.2.5

ReadyNas 102 IPv4

READYNAS 102 email Notifications

Accessing journalctl command on ReadyNAS 102

ReadyNAS 102

NETGEAR Academy

ProSupport for Business