ReadyNAS Device Compatibility List

tg3 wrote:
I can confirm my GigE switch works fine with the ReadyNAS NV. Netgear ProSafe GS116 (GigE, Jumbo Frames, 16 port, non-managed). Have not tested the jumbo frame feature. Much to my delight, GigE works fine on a home Cat 5 network installed nearly 10 years ago.

tg3, have you verified performance with IOMeter? It'll be good to get jumbo frame numbers before we put it on the list. Thanks!

I have successfully shared the printer in my Samsung SCX-4521F all-in-one under XP. Printing works fine and is pretty fast.

Is it even possible to share a scanner over the network? I wouldn't think so.

I can confirm my GigE switch works fine with the ReadyNAS NV.

Netgear ProSafe GS116 (GigE, Jumbo Frames, 16 port, non-managed).

Have not tested the jumbo frame feature.

Much to my delight, GigE works fine on a home Cat 5 network installed nearly 10 years ago.

woodstock wrote:
Not yet. The UPS is plugged into an outlet that is blocked by a heavy bookcase -- so it may be awhile before I can unplug it. I don't really want to start flipping breakers. :) Here's something odd I just noticed about the UPS. On the Health page, it claims the battery charge is 120%/45min. 120%?

OK, I'll hold off on putting the UPS in our list. I haven't seen these UPS's before. Do you know if they're rebranded?

dedalo wrote:
I have linked my two USB printers on ReadyNAS 600 and they are working. Infrant ReadyNAS 600 RAIDiator™ v3.00c1-p2 [1.00a131] HP Deskjet 6540 HP officejet 5510

Thanks!

I have linked my two USB printers on ReadyNAS 600 and they are working.

Infrant ReadyNAS 600
RAIDiator™ v3.00c1-p2 [1.00a131]

HP Deskjet 6540
HP officejet 5510

Not yet. The UPS is plugged into an outlet that is blocked by a heavy bookcase -- so it may be awhile before I can unplug it. I don't really want to start flipping breakers. :)

Here's something odd I just noticed about the UPS. On the Health page, it claims the battery charge is 120%/45min. 120%?

woodstock wrote:

The following all work with my NV (v3.00c1-p2): USB HARD DISKS / ENCLOSURES Wolverine 2040 (enclosure contains 40GB Toshiba MK4025FAS laptop drive) USB FLASH SanDisk Cruzer mini 1GB SanDisk Cruzer micro 512MB VisionTek flash drive 512MB USB PRINTERS HP OfficeJet 7210 All-in-One USB UPS Dynex DX-800U (800AVR) USB CAMERAS (new section?) FujiFilm FinePix F10 (it appears as: USB_FLASH_# FUJIFILM USB-DRIVEUNIT)

Thanks!

For the UPS, did you run-down the battery and check for graceful shutdown?

The following all work with my NV (v3.00c1-p2):

USB HARD DISKS / ENCLOSURES
Wolverine 2040 (enclosure contains 40GB Toshiba MK4025FAS laptop drive)

USB FLASH
SanDisk Cruzer mini 1GB
SanDisk Cruzer micro 512MB
VisionTek flash drive 512MB

USB PRINTERS
HP OfficeJet 7210 All-in-One

USB UPS
Dynex DX-800U (800AVR)

USB CAMERAS (new section?)
FujiFilm FinePix F10 (it appears as: USB_FLASH_# FUJIFILM USB-DRIVEUNIT)

kat_ams wrote:
To add to the compatiblity list... Konica Minolta Magicolor 2400W colour laser printer works great on the Ready NAS.

Thanks!