NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS NV+ Died - Recover Data? #24845419
Hi, I've got a ReadyNAS NV+ (RND4000v3) which I had to power down to move last night. It shut down normally (or so it appeared), but now will not power on. I suspect it's a PSU failure but can't be...
The NV+ v1 hardware revision 1, NV+ v1 hardware revision 2 and NV+ hardware revision 3 have only minor hardware differences between them.
The NV+ v2 is a completely different product.
Best in my view to put a spare disk (not from your array) in the replacement, make sure the firmware is at least as new as what you were running (and if not upgrade, then verify the update is successful), then power down, remove the spare disk and migrate your disks across.
The NV+ v2 is a completely different product.
Best in my view to put a spare disk (not from your array) in the replacement, make sure the firmware is at least as new as what you were running (and if not upgrade, then verify the update is successful), then power down, remove the spare disk and migrate your disks across.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
