NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNas NVX and GS108T Jumbo Frames
I decided to try teaming the cat6 cables on both my NVX and have a problem. Previously I had a mac/gs108/NVX all with jumbo frames active at 9000. Now I just bought a gs108T and teamed a couple ...
Well, I tried that and no go (went to the max of 9216). Again, when I check the 'use jumbo frames' checkbox on the nas config screen it seems unhappy. After a reboot, I can't access the admin page of the nas (It goes to a blank page with no choices on the left). I have to go into the switch settings and disable the members of the LAG. Then all is well again. I can use raidar to confirm that it is seen on the fixed ip address as expected, so I'm really confused.
I appreciate it may make no difference, but I have invested in a new switch by the same manufacturer and can't believe they won't play together. I'm just hoping I have made a simple mistake in one of the settings. But which one? I'm on a mac and most of this is going straight over my head - the gs108t gives a huge number of esoteric settings with very limited explanations and none that mean anything to me.
Hope someone can shed some light on what might be happening.
Graham
I appreciate it may make no difference, but I have invested in a new switch by the same manufacturer and can't believe they won't play together. I'm just hoping I have made a simple mistake in one of the settings. But which one? I'm on a mac and most of this is going straight over my head - the gs108t gives a huge number of esoteric settings with very limited explanations and none that mean anything to me.
Hope someone can shed some light on what might be happening.
Graham
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
