NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Pro 6 won't start up
Hi there, We recently moved house and, having unpacked my tech stuff, I've just plugged in my trusty ReadyNAS and, er, nothing happens, other than some flickering on the status lights on the LAN por...
- Fixed! I’ve taken every connection off and cleaned them up, mounted the new owner supply externally and it’s booted up and discoverable. Thanks all for your help!
I have received and installed a new power supply (Seasonic SSP-300SFG). The good news is that the unit now has power but it is stuck showing 'ReadyNAS' on the display. I've had a quick search and it's not looking good, for example in this similar thread:
I have tried resetting but nothing happens. Also, the main NAS fan above the power supply is working but there are no LAN lights illuminating. I've tried various leads on both ports and different ports both on my router and on some Devolo Magic 2 units installed around the house, with the same result. Obviously Raidar isn't finding it either.
Is there any way to get my data off the discs? Or any other suggestions?
Thanks,
Martin
The NAS will display "ReadyNAS" if just the 5V of the supply is working, so a lot could be wrong. The first thing to check is that all the power supply connections are fully seated, especially the 24-pin extender cable (assuming you needed one) and the square 4-pin 12V CPU power connector (which is easy to forget to install). Also check that the RAM is properly seated, as you likely had to remove it to plug in the 24-pin connection. Make sure you didn't damage anything in the process of replacing the supply.
If nothing looks wrong, and assuming the new supply isn't partly DOA, then your supply may have taken the NAS with it when it died.
- Sandshark
Thanks very much for the continued help. I’ve checked all of the connections and also tried with a different mains lead and with another PSU. The only difference is that now it won’t start at all. No signs of life whatsoever. So, I think I’m going to have to give up and turn my attention to attempting to recover the data is this a possibility? The discs themselves should be fine, since the NAS was working fine when it was last closed down. Again, any help or pointers to other resources would be greatly appreciated.
Thanks again,
MartinIf you were still running RAIDiator 4.2.x, then you can install the old drives in a new ReadyNAS only such that you can recover the data to a backup system. I don't have a handy pointer to that procedure. A used replacement is also an option, but you are buying a rather old NAS.
If you had updated to OS6.x, then you can move the drives right into any new OS6 based NAS.
There are some other methods using a Linux system or special recovery software, but few have the ability to mount 6 drives on a PC to utlize them.
- I think I was still on 4.2.x. I’ll have a sniff around on Google to ascertain if there’s a foolproof way to pull it off. Thanks again.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
