NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
JohnPud
May 02, 2025Aspirant
reconfigure readynas 104
Posted elsewhere but hadn't considered business solutions - sorry. My readynas 104 was configured with disk 1 and 2 as raid 0 and disks 3 and 4 as two jbod volumes. I decided to split disks 1 and 2 a...
StephenB
May 02, 2025Guru - Experienced User
JohnPud wrote:
Posted elsewhere but hadn't considered business solutions - sorry. My readynas 104 was configured with disk 1 and 2 as raid 0 and disks 3 and 4 as two jbod volumes. I decided to split disks 1 and 2 as two jbod. I removed all disks, cleaned disks 1 and 2, did a factory reset and set them up as 2 jbod volumes. Can I now safely return disks 3 and 4 without losing the data?
Did you export the two jbod volumes before you removed the disks?
If not, then try powering down the NAS, removing disks 1 and 2, and booting up the NAS with only disks 3 and 4 installed. The RAID-0 volume will show up as failed/not present. Then see if you can export the two jbod volumes.
If that works (or if you previously exported the volumes), then power down, insert all disks, and power up again.
- JohnPudMay 02, 2025Aspirant
Thanks for the quick reply. The current situation is disks 1 and 2 are installed as 2 x jbod and I am restoring files to them as I write. So can I now return disks 3 and 4 without losing the data on them? I'm just worried that the factory reset may have done something that causes the nas to format them instead of simply mount them.
- StephenBMay 02, 2025Guru - Experienced User
JohnPud wrote:
So can I now return disks 3 and 4 without losing the data on them?
No, that is not what I said. Go back and read post # 2 again. Pay particular attention to the need to export the volumes.
You can of course back up the files on disks 3 and 4 when you boot up the system with only those disks in place.
- JohnPudMay 02, 2025Aspirant
The raid 0 volume no longer exists. I have now got disks 1, 2 and 4 all as single jbod volumes, and all are active and saving data. So my concern is can I return disk 3, containing data from before starting this evolution, into slot 3 and have the shares on it available again, or will it be reformatted by the nas? I am aiming for 4 individual jbod volumes.
Related Content
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!