NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RNDP4000 No Network Connection or Boot
Hi, Just joined the forum. I've recently purchased a second hand RNDP4000 (diskless) on a spares/repair basis. It was cheap so decided to take the risk. However, I think the Network interface is dea...
The link should be active even with no disks installed, and RAIDar should tell you that status.
It shouldn't matter what bay you use, though I have always started with bay 1 myself. Checking the drive would be a good step. Also, how big is the drive? If the firmware is too old, it might not support the larger disk sizes.
There is a USB recovery procedure for the flash which you could attempt. Sometimes it corrupts the eprom (containing the model/serial information), so there is some risk. Though you don't have too many options.
It shouldn't matter what bay you use, though I have always started with bay 1 myself. Checking the drive would be a good step. Also, how big is the drive? If the firmware is too old, it might not support the larger disk sizes.
There is a USB recovery procedure for the flash which you could attempt. Sometimes it corrupts the eprom (containing the model/serial information), so there is some risk. Though you don't have too many options.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
