[SOLVED] 516 gets "CPU temp exceeded safety threshold"

I went back to an old beta forum and found notes about setting minimum fan speed, but that was way back on 6.0.1... :) FWIW, the path for these was in /sys/class/hwmon/device, and below I've dumped the values from fan* and pwm*, if it's interesting or helpful to the inquiry.

fan1_alarm	0
fan1_input	823
fan1_min	0
fan1_pulses	2
fan1_target	0
fan1_tolerance	0
fan2_alarm	0
fan2_input	0
fan2_min	0
fan2_pulses	2
fan2_target	27000
fan2_tolerance	0
pwm1	3
pwm1_auto_point1_pwm	140
pwm1_auto_point1_temp	25000
pwm1_auto_point2_pwm	170
pwm1_auto_point2_temp	35000
pwm1_auto_point3_pwm	200
pwm1_auto_point3_temp	45000
pwm1_auto_point4_pwm	230
pwm1_auto_point4_temp	55000
pwm1_auto_point5_pwm	255
pwm1_auto_point5_temp	60000
pwm1_crit_temp_tolerance	0
pwm1_enable	1
pwm1_floor	1
pwm1_mode	1
pwm1_start	1
pwm1_step_down_time	1000
pwm1_step_up_time	1000
pwm1_stop_time	6000
pwm1_target_temp	0
pwm1_temp_sel	2
pwm1_temp_tolerance	0
pwm1_weight_duty_base	0
pwm1_weight_duty_step	0
pwm1_weight_temp_sel	1
pwm1_weight_temp_step	0
pwm1_weight_temp_step_base	0
pwm1_weight_temp_step_tol	0
pwm2	127
pwm2_auto_point1_pwm	140
pwm2_auto_point1_temp	40000
pwm2_auto_point2_pwm	170
pwm2_auto_point2_temp	50000
pwm2_auto_point3_pwm	200
pwm2_auto_point3_temp	60000
pwm2_auto_point4_pwm	230
pwm2_auto_point4_temp	70000
pwm2_auto_point5_pwm	255
pwm2_auto_point5_temp	75000
pwm2_crit_temp_tolerance	0
pwm2_enable	1
pwm2_floor	1
pwm2_mode	1
pwm2_start	1
pwm2_step_down_time	1000
pwm2_step_up_time	1000
pwm2_stop_time	6000
pwm2_target_temp	50000
pwm2_temp_sel	7
pwm2_temp_tolerance	0
pwm2_weight_duty_base	0
pwm2_weight_duty_step	0
pwm2_weight_temp_sel	1
pwm2_weight_temp_step	0
pwm2_weight_temp_step_base	0
pwm2_weight_temp_step_tol	0