I got iSTat installed and running. But launch button is not active.It does day what port to use, and what the default password, question is, what is the URL?I tried http://<NAS>:5109 but get a "null" back.

Hi Scott - iStat requires a separate client application. There is no "URL", as it does not have a web interface.For example, if you have an iPhone, you can purchase a client from Bjango:https://itunes.apple.com/us/app/istat-2 ... 29458?mt=8Alternatively, if you have an Android phone, you can leverage my application, NAS Utils:http://bit.ly/1aDvkgR

Right, I have it installed on my tablet, when I run it and look at Telemetry(iStat) it reminds me that I need an add-on (which I have installed on my NAS) and then proceeds to tell me I need an iStat passcode, and to check my configuration...

doylmi wrote:Hi Scott - iStat requires a separate client application. There is no "URL", as it does not have a web interface.For example, if you have an iPhone, you can purchase a client from Bjango:https://itunes.apple.com/us/app/istat-2 ... 29458?mt=8FIVE Bucks?! Is there anything cheaper you could recommend?(Sorry for hijacking thread slightly)

It's free on the android. But my experience is above... No idea not to establish my "passcode"Or stated different, there is no charge for the one I can't get to work! ;-)

ScottChapman wrote:It's free on the android. But my experience is above... No idea not to establish my "passcode"Or stated different, there is no charge for the one I can't get to work! ;-)No problem, please use the following steps:[list=a:3hvn35tz]Go to the main screen (the one that lists your NAS device(s)). Press and hold your finger on the one you want to update the passcode for.Click "Edit" when the context menu pops upScroll to the bottom, and update the passcodePress saveI'll make sure this is clearer in the next iteration. Will probably prompt for the passcode iStat is detected, but the passcode is missing.

how to configure iStat on OS6? | NETGEAR Communities

15 Replies

Replies have been turned off for this discussion

super_poussin
Virtuoso
Jan 29, 2014
Yep that's 12345 by default as written on the frontview interface
doylmi
Guide
Feb 04, 2014
How'd it go? :)
ScottChapman
Apprentice
Feb 04, 2014
doylmi wrote:
How'd it go? :)

Got it. THanks!
doylmi
Guide
Feb 09, 2014
doylmi wrote:
I'll make sure this is clearer in the next iteration. Will probably prompt for the passcode iStat is detected, but the passcode is missing.

This has been implemented.
- ReadyAS
  Guide
  Nov 08, 2015
  I will describe my case I had on RNDP4000 with OS6:
  
  The stat daemon did not started, so I tried to run it manualy:
  root@nas:/apps/istat/bin# ./istatd
  and I saw the message:
  "Could not read configuration from /usr/local/etc/istat.conf: No such file or directory
  root@nas:/apps/istat/bin# more istatd"
  
  So I copied istat.conf:
  root@nas:/apps/istat/bin# cp -p /etc/istat.conf /usr/local/etc/
  
  Since this time there was not problem tu run the stat daemon from UI using ON/OFF switch, but still the main RUN button is inactive.
  
  Iteresting that:
  "root@nas:/apps/istat/bin# ps -ef|grep istat
  admin 18717 1 0 18:45 ? 00:00:00 /apps/istat/bin/istatd -d -c /etc/istat.conf"
  
  I mean "/etc/istat.conf" is as a parameter and "/usr/local/etc/istat.conf" is used in reality? Is the second path hardcoded?

Forum Discussion

how to configure iStat on OS6?

15 Replies

Related Content

RN102 OS6 Home folder

Ultra 6 + OS6 admin page communication error

Snapshots on RN528 OS6

Bjango iStat App infected?

Best firmware for RNDP2000 after OS6 upgrade

NETGEAR Academy

ProSupport for Business