Hi all,I dont know if this is the right place to post but...I managed to get my hands on a NewCS verision compiled for ReadyNas. It seems to be working all right exept the Kernel for ReadyNAS does not have "Serial Device Convertor" compiled so my Phoenix USB readers never get mapped to tty\USB\x .I have read in some forums and it seems to be 2 missing for this to work.usbserialftdi_sioSomeone know how to compile these files for the ReadyNas, someone know where to find information about this?

Here are the files, do not forget to thanks SkyWalker at http://www.readynas.com forum for bringing these files to humanity!!http://www.readynas.com/download/modules/ftdi_sio.kohttp://www.readynas.com/download/modules/usbserial.koThanks SkyWalker!If you want to run NewCS on ReadyNAS - Download newcs_readynas.rar from http://rapidshare.com/files/191283875/newcs_readynas.rar.html (direct link)- Unrar them /usr/local/bin- Run chmod 775 -X newcs, start- Run insmod usbserial.ko- Run insmod ftdi_sio.ko- Start NewCS with ./newcs -c newcs.xml (or just ./start)Then log in at http://your_nas_ip:9999 Username: newcsPassword: newcsEnjoy!

Hi! I have put the news directory under /usr/local/bin and when I run chmod 775 -X newcs, start I get the answerNasServer:/usr/local/bin/newcs# chmod 775 -X newcs, startchmod: getting attributes of `775': No such file or directorychmod: getting attributes of `newcs,': No such file or directNasServer:/usr/local/bin/newcs#Also when i run insmod fdti_sio.ko i get thisNasServer:/usr/local/bin/newcs# insmod fdti_sio.koinsmod: can't read 'fdti_sio.ko': No such file or directoryNasServer:/usr/local/bin/newcs#Is it possible for the pros to see what's wrong?bstrgdrds Anders

What is NewCS for?I did some looking around; and about all I can figure is that it's got something to do with satellite TV.

AndersE wrote:Hi! I have put the news directory under /usr/local/bin and when I run chmod 775 -X newcs, start I get the answerNasServer:/usr/local/bin/newcs# chmod 775 -X newcs, startchmod: getting attributes of `775': No such file or directorychmod: getting attributes of `newcs,': No such file or directNasServer:/usr/local/bin/newcs#Also when i run insmod fdti_sio.ko i get thisNasServer:/usr/local/bin/newcs# insmod fdti_sio.koinsmod: can't read 'fdti_sio.ko': No such file or directoryNasServer:/usr/local/bin/newcs#Try just single chmod commands like 'chmod 755 newcs' and 'chmod 755 start'.Did you download the two listed modules do that same directory? You can't insmod a module that doesn't exist. Try using wget to download those two files first.

NewCS on ReadyNAS DUO! | NETGEAR Communities

35 Replies

Replies have been turned off for this discussion

Juhlen
Aspirant
Oct 11, 2011
I'm going crazy here....

I'm by no means a Linux Pro, but damnit how hard can it be?
I thought getting the cardreader (Phoenix from AD Teknik Sweden) to work was gonna be the problem. But no. All that worked like a charm. I get the mods in there, loading and all is fine, and I see the reader (I think) when I do: dmesg

It's starting the damn thing that is the problem.

No matter how I copy newcs to my NAS (Tried both simply tranfering from Windows Explorer to /Media and also WinSPC to Root) the file seems to be faulty?
I copy the file newcs.readynas to my: /use/local/bin
did all the chmodding: chmod 775 newcs

and when I try to start it with:
./newcs -c newcs.xml

I always get:
-bash: newcs: cannot execute binary file

Woot? It's working for everbody else? Any ideas? Going mad here. It's the binary from 1.67 RC1.zip, and I'm using the newcs.readynas - file, which should be the file for my ReadNas NV+.

HEEEEEEEEEEEEEeeeeeeeeeeeeeeeeeeeeeeelp!!!! plz

What is wrong?
duch71
Aspirant
Jan 04, 2012
Hi All,

I have a problem . Need install newcs on readynas duo (RAIDiator 4.1.8). I installed succesfull usbserial.ko and ftdi_sio.ko from this links:
http://www.readynas.com/download/modules/ftdi_sio.ko
http://www.readynas.com/download/modules/usbserial.ko

and this links "- Download newcs_readynas.rar from http://rapidshare.com/files/191283875/newcs_readynas.rar.html (direct link)" - not work.

Please, if anybody have working newcs for readynas duo send me PM or link.

Thx

PS. sorry for my english

zukon

Aspirant

Dec 13, 2013

Hello!!

Based on information in this forum I make oscam compilation for SPARC architecture :D my last compilation:

https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn9092-sparc-linux

Unix starttime: 1386884940
Starttime:      12.12.2013 22:49:00
Version:        oscam-1.20-unstable_svn-r9092
ConfigDir:      /usr/local/bin/

Web interface support:         yes
Touch interface support:       yes
SSL support:                   no
DVB API support:               yes
DVB API with AZBOX support:    no
DVB API with MCA support:      no
DVB API with COOLAPI support:  no
DVB API with STAPI support:    no
Anti-cascading support:        yes
Irdeto guessing:               yes
Debug mode:                    yes
Monitor:                       yes
Loadbalancing support:         yes
CW Cycle Check support:        yes
LCD support:                   no
LED support:                   no
IPv6 support:                  no
Cache exchange support:        yes

camd 3.3x:                     no
camd 3.5 UDP:                  no
camd 3.5 TCP:                  no
newcamd:                       yes
CCcam:                         yes
CCcam share:                   yes
Pandora:                       no
ghttp:                         yes
gbox:                          no
radegast:                      no
serial:                        yes
constant CW:                   yes

Reader support:                yes

Nagra:                         yes
Irdeto:                        yes
Conax:                         yes
Cryptoworks:                   yes
Seca:                          yes
Viaccess:                      yes
NDS Videoguard:                yes
DRE Crypt:                     yes
TONGFANG:                      yes
Bulcrypt:                      yes
Griffin:                       yes
DGCrypt:                       yes

cardreader_phoenix:            yes
cardreader_internal_azbox:     no
cardreader_internal_coolapi:   no
cardreader_internal_sci:       yes
cardreader_sc8in1:             no
cardreader_mp35:               no
cardreader_smargo:             no
cardreader_pcsc:               no
cardreader_smartreader:        no
cardreader_db2com:             no
cardreader_stapi:              no
cardreader_stinger:            yes

and some older:
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn7157-sparc-linux
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn7173-sparc-linux
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn7184-sparc-linux
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn7750-sparc-linux
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn8377-sparc-linux
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn8699-sparc-linux
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn8821-sparc-linux
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn8988-sparc-linux

Runing script (put in /var/spool/frontview/boot)
02_rs232_usb_oscam

#!/bin/sh
#/var/spool/frontview/boot albo zmienin na start.sh i uruchamiaj z reki

/sbin/insmod /usr/local/bin/usbserial.ko
/sbin/insmod /usr/local/bin/pl2303.ko
#/sbin/insmod /usr/local/bin/ftdi_sio.ko

sleep 3

#/usr/local/bin/newcs -C /usr/local/bin/newcs_phoenix.xml
/usr/local/bin/oscam -b -c /usr/local/bin/

Somtime I put SPARC compilation with other on pkteam.pl (sh4/arm/mips).

Regards
zukon/PKT

zukon

Aspirant

Apr 28, 2014

Actual compilation:
https://dl.dropboxusercontent.com/u/86095873/oscam/oscam-1.20-unstable_svn9676-sparc-linux

Unix starttime: 1398373491
Starttime:      24.04.2014 23:04:51
Version:        oscam-1.20-unstable_svn-r9676
Compiler:       sparc-linux
ConfigDir:      /usr/local/bin/

Web interface support:         yes
LiveLog support:               yes
jQuery support intern:         yes
Touch interface support:       yes
SSL support:                   no
DVB API support:               yes
DVB API with AZBOX support:    no
DVB API with MCA support:      no
DVB API with COOLAPI support:  no
DVB API with STAPI support:    no
DVB API with Samsung TV support: no
Anti-cascading support:        yes
Irdeto guessing:               yes
Debug mode:                    yes
Monitor:                       yes
Loadbalancing support:         yes
CW Cycle Check support:        yes
LCD support:                   no
LED support:                   no
IPv6 support:                  no
Clockfix with realtime clock:  yes
Cache exchange support:        yes

camd 3.3x:                     no
camd 3.5 UDP:                  no
camd 3.5 TCP:                  no
newcamd:                       yes
CCcam:                         yes
CCcam share:                   yes
Pandora:                       no
ghttp:                         yes
gbox:                          no
radegast:                      no
serial:                        yes
constant CW:                   yes

Reader support:                yes

Nagra:                         yes
Irdeto:                        yes
Conax:                         yes
Cryptoworks:                   yes
Seca:                          yes
Viaccess:                      yes
NDS Videoguard:                yes
DRE Crypt:                     yes
TONGFANG:                      yes
Bulcrypt:                      yes
Griffin:                       yes
DGCrypt:                       yes

cardreader_phoenix:            yes
cardreader_internal_azbox:     no
cardreader_internal_coolapi:   no
cardreader_internal_sci:       yes
cardreader_sc8in1:             no
cardreader_mp35:               no
cardreader_smargo:             no
cardreader_pcsc:               no
cardreader_smartreader:        no
cardreader_db2com:             no
cardreader_stapi:              no
cardreader_stinger:            yes

Regards
zukon/PKT

aequus
Aspirant
Nov 03, 2014
I Need the files plus the modules for my 516, please help

Forum Discussion

NewCS on ReadyNAS DUO!

35 Replies

Related Content

readynas duo v2 disk failed ..

ReadyNas Duo

ReadyNAS Duo

ReadyNAS Duo still running!

ReadyNAS Duo RND2210v2

NETGEAR Academy

ProSupport for Business