NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Duo/ Readynas photos
Hello Everyone!
I have a problem with install Readynas Photos into my ReadyNAS Duo.
System not accept Readynas Photos II.bin
Error: The update file is not suitable for this architecture.
Where I can download needed file?
Please help.
| Model: | ReadyNAS Duo [X-RAID] |
| Serial No: | 24M4157E00XXX |
| Software: | RAIDiator 4.1.16 [1.00a043] |
| Memory: | 1024 Mb [2.5-3-3-7] |
Hi Pavelods
Welcome to the Community!
If you have a Duo V1 unfortunately Photos II is not compatible with it, You have to have a Duo V2 for it to come installed with the firmware.
if you have a V2 then make sure you update the firmware then try to install the add-on again.
Photos i which Duo V1 supports is already EOL, Click here for the info.
Hope this helps!
Regards
3 Replies
Replies have been turned off for this discussion
Hi Pavelods
Welcome to the Community!
If you have a Duo V1 unfortunately Photos II is not compatible with it, You have to have a Duo V2 for it to come installed with the firmware.
if you have a V2 then make sure you update the firmware then try to install the add-on again.
Photos i which Duo V1 supports is already EOL, Click here for the info.
Hope this helps!
Regards
Marc_V wrote:
If you have a Duo V1 ...
Pavelods: You definitely have a v1. A Duo v2 runs 5.3.x firmware. A Duo v1 runs 4.1.x - and that is clearly what you are running.
So your NAS is not compatible with Photos II, and as Marc_V explains, you can't use Photos I either. Your best option is to look for a service that either runs on a cloud server or runs on a PC.
In any case Photos II has been discontinued as well so even on models that supported that it can't be used anymore.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
