NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Duo v2 refuses to install any Add-on
Hi community, I'm using a ReadyNAS Duo v2, with the current firmware 5.3.13 and I've performed a full disk wipe, hard reset on the system. So I've got 1 x WD 2TB drive in it and its health, so every...
- The solution was to install the addon using Firefox, for some reason all other browsers give an error using the ReadyNAS web gui. All good and hope this helps someone else.
Did you set up the NAS to use a static IP address? If you did, make sure you configured a DNS server (and that the subnet mask and gateway are correct).
Hi, I removed the MAC address filter in the router and rebooted the NAS, it now has a true DHCP IP address and default settings. However same error no matter what addin I use for the Duo V2.
It seems like the time it takes to reject / give the error is correlated to the addin complexity. So the SSH enabler is very quick to give the error and the Transmission one is slower, but they all give the same error.
Thanks again
It seems like the time it takes to reject / give the error is correlated to the addin complexity. So the SSH enabler is very quick to give the error and the Transmission one is slower, but they all give the same error.
Thanks again
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
