NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS NV+ V2 Can't map network drives Win 11
Win 11 Readynas NV+ v2 Firmware 5.3.13 Hi All, I'm having issues connecting to my readynas since I upgraded to win 11. I've had to access it through IE mode in Edge as I had the error. This al...
Skarnath wrote:
This site can’t provide a secure connection
192.168.155.218 uses an unsupported protocol.
ERR_SSL_VERSION_OR_CIPHER_MISMATCHThis error is happening when you are accessing the dashboard via your browser - not when you are accessing network drives with file explorer.
For network drives:
- make sure the SMB 1/CIFS client is enabled on the PC. Do this by going into "turn windows features on or off".
- make sure you use correct slash direction in the file explorer address bar ( \\nas-name , not //nas-name )
Clicking on icons in the network list often will result in opening the browser instead of opening the share list in explorer.
For the web browser issue, there is an extended discussion of options here:
You should be able to reach the dashboard using Edge in IE mode (details are in the linked thread). It is also possible to configure FireFox to allow TLS 1.0.
Once in, install this add-on to get TLS 1.2 support in the NAS:
Skarnath wrote:
This site can’t provide a secure connection
192.168.155.218 uses an unsupported protocol.
ERR_SSL_VERSION_OR_CIPHER_MISMATCH
This error is happening when you are accessing the dashboard via your browser - not when you are accessing network drives with file explorer.
For network drives:
- make sure the SMB 1/CIFS client is enabled on the PC. Do this by going into "turn windows features on or off".
- make sure you use correct slash direction in the file explorer address bar ( \\nas-name , not //nas-name )
Clicking on icons in the network list often will result in opening the browser instead of opening the share list in explorer.
For the web browser issue, there is an extended discussion of options here:
You should be able to reach the dashboard using Edge in IE mode (details are in the linked thread). It is also possible to configure FireFox to allow TLS 1.0.
Once in, install this add-on to get TLS 1.2 support in the NAS:
Thanks StephenB!
I've been able to get onto the dashboard through an IE window in Edge as per the link you shared.
I installed the update for the TLS 1.2, it ended in an error message and said it couldn't be installed but once I'd run through that process I was able to hit Browse in RAIDar and map the drives as normal so it all worked out beautifully!
Thanks you so much for your help.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
