NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Aall shares have disappered from the web UI
Annoyingly, my system restarted itself unexpectedly at around 10pm last night and when it came back up, all the shares (except for home folders) had disappeared from the shares tab of the web UI, alt...
XtheUnknown wrote:
df -h is showing /dev/md0 partition is 36% (of 4G) used but
btrfs file usage // shows only 330 MB unallocated (of 4GB).
Run a balance
btrfs balance //That should increase the unallocated space.
FWIW, running out of unallocated space could have triggered your problem.
It's a 626X running 6.10.9
XtheUnknown wrote:
It's a 626X running 6.10.9
Do you have a backup of the files?
I'd start by looking in
- dmesg.log
- status.log
- readynasd.log
and then look in
- system.log
- kernel.log
- systemd-journal.log
Maybe also check the unallocated space in the OS partition using ssh. btrfs file usage //
All those log files have been overwritten since the event, except STATUS.LOG which just confirms that ReadyNASOS service was restarted at 22:38:12 on 2024/12/31.
Yes, I have a full backup on another ReadyNAS, so if files have become corrupted I could potentially factory reset and restore the whole system from backup (although I'd rather not go through that!)
df -h is showing /dev/md0 partition is 36% (of 4G) used but
btrfs file usage // shows only 330 MB unallocated (of 4GB).
I've also (now) downloaded and run the "codycook" share_lun_ui_fix.sh script which (as my shares had already re-appeared following my restore of the configuration file and subsequent reboot) does not appear to have done any harm (and hopefully has tweaked anything not fixed by my initial approach)
XtheUnknown wrote:
df -h is showing /dev/md0 partition is 36% (of 4G) used but
btrfs file usage // shows only 330 MB unallocated (of 4GB).
Run a balance
btrfs balance //That should increase the unallocated space.
FWIW, running out of unallocated space could have triggered your problem.
Indeed it did, from 330MB to 2.06GB.
I had been adding a lot of files (and deleting some too) earlier on that day.
FYI my volume has (over a couple of years) been vertically expanded from 10TB drives to 16TB drives, so it's really two volumes made to appear as one by the magic of XRAID. Does such a configuration require more frequent balances to ensure that both the 10TB and 6TB partitions (on each drive) are equally full?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
