NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Anyone using Seagate ST2000DM001 2TB drives in their NAS?
I was wondering if anyone was using Seagate ST2000DM001 2TB drives in their NAS? I found a lot of mixed reviews on this drive and was wondering if anyone here had any experience with this drive eith...
Yes i am using 1 of these drives and so far no issues after 6 months use, these drives must have firmware CC4H or newer so if they do not then update them before you put them in your Readynas and check the HCL to make sure they are certified for your Readynas > http://kb.netgear.com/app/answers/detail/a_id/20641
Below are my smart stats for this disk
ST2000DM001-9YN164 1863 GB
Firmware Version: CC4H
SMART Attribute
Spin Up Time: 0
Start Stop Count: 823
Reallocated Sector Count: 0
Power On Hours: 1432
Spin Retry Count: 0
Power Cycle Count: 388
Runtime Bad Block: 0
End-to-End Error: 0
Reported Uncorrect: 0
Command Timeout: 0
High Fly Writes: 0
Airflow Temperature Cel: 33
G-Sense Error Rate: 0
Power-Off Retract Count: 386
Load Cycle Count: 9301
Temperature Celsius: 33
Current Pending Sector: 0
Offline Uncorrectable: 0
Below are my smart stats for this disk
ST2000DM001-9YN164 1863 GB
Firmware Version: CC4H
SMART Attribute
Spin Up Time: 0
Start Stop Count: 823
Reallocated Sector Count: 0
Power On Hours: 1432
Spin Retry Count: 0
Power Cycle Count: 388
Runtime Bad Block: 0
End-to-End Error: 0
Reported Uncorrect: 0
Command Timeout: 0
High Fly Writes: 0
Airflow Temperature Cel: 33
G-Sense Error Rate: 0
Power-Off Retract Count: 386
Load Cycle Count: 9301
Temperature Celsius: 33
Current Pending Sector: 0
Offline Uncorrectable: 0
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
