NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
tuxmike
Dec 29, 2013Aspirant
Backup ALL local shares to USB drive
Hi, I just wondered how to use USB as a Backup destination for RN 102, because it will always copy data from inside the share to the root of the USB device, and that for each share, mixing up the sha...
pixel81
Jan 28, 2014Guide
I have a RN316 currently on Firmware 6.1.4.
Using these settings I’ve been able to successfully backup the /data volume using a Rsync backup to a USB disk (USB_HDD_1) via the Dashboard (Backup tab) and exclude the snapshot data:
0. “Add Backup”
Name: <your choice>
Source: volume: data
Destination: remote: Rsync Server
Select ‘Create’
Note: “share: USB_HDD_1” couldn’t be used for Destination - it was an available selection, but “Destination” turned red when I selected ‘Create’
1. Source tab
Type: volume
Name: volume: data
2. Destination tab
Type: remote
Name: remote: Rsync Server
Host: localhost
Path: USB_HDD_1/backup/RN316Store
Note: the backup creates a folder named ‘data’ under USB_HDD_1/backup/RN316Store
Note2: select ‘Test Connection’ - results in an Info pop-up with:
“Successfully connected to localhost::USB_HDD_1/backup/RN316Store”
3. Advanced tab
Remove deleted files on source - is checked
FILES & FOLDERS TO BE EXCLUDED:
- Select the ‘+’, enter the following in the “Name:” text box, select ‘Apply’:
/data/._share
Note: this prevents the snapshot data from being copied (i.e. /data/._share)
4. Schedule tab & Options tab - your choice
Using these settings I’ve been able to successfully backup the /data volume using a Rsync backup to a USB disk (USB_HDD_1) via the Dashboard (Backup tab) and exclude the snapshot data:
0. “Add Backup”
Name: <your choice>
Source: volume: data
Destination: remote: Rsync Server
Select ‘Create’
Note: “share: USB_HDD_1” couldn’t be used for Destination - it was an available selection, but “Destination” turned red when I selected ‘Create’
1. Source tab
Type: volume
Name: volume: data
2. Destination tab
Type: remote
Name: remote: Rsync Server
Host: localhost
Path: USB_HDD_1/backup/RN316Store
Note: the backup creates a folder named ‘data’ under USB_HDD_1/backup/RN316Store
Note2: select ‘Test Connection’ - results in an Info pop-up with:
“Successfully connected to localhost::USB_HDD_1/backup/RN316Store”
3. Advanced tab
Remove deleted files on source - is checked
FILES & FOLDERS TO BE EXCLUDED:
- Select the ‘+’, enter the following in the “Name:” text box, select ‘Apply’:
/data/._share
Note: this prevents the snapshot data from being copied (i.e. /data/._share)
4. Schedule tab & Options tab - your choice
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!