NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
can't copy files to readynas with new 6TB drive
Hi there I recently removed my 2x3TB drives from my ReadyNAS NV+ v2 and replaced them with one WD RED 6TB 3.5" SATA 6GB/s 64MB Hard Drive. After performing the necessary factory reboot in the stan...
Thanks for the quick reply
The readynas is connected directly to the router with an ethernet cable (not entirely sure on the grade). The connection from the computer and mac is router - approx 30m cat5e - gigabit switch - cat6 cable or wireless repeater.
The firmware is the latest version, RAIDiator 5.3.10. I did attempt to downgrade to 5.3.9 but ran into difficulties doing this, I could try again if you'd suggest?
I have not tested the disk, I will give this a try first first tomorrow.
Thanks
The readynas is connected directly to the router with an ethernet cable (not entirely sure on the grade). The connection from the computer and mac is router - approx 30m cat5e - gigabit switch - cat6 cable or wireless repeater.
The firmware is the latest version, RAIDiator 5.3.10. I did attempt to downgrade to 5.3.9 but ran into difficulties doing this, I could try again if you'd suggest?
I have not tested the disk, I will give this a try first first tomorrow.
Thanks
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
