NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

dunky76's avatar
dunky76
Aspirant
May 21, 2018
Solved

Connecting My ReadyNAS NVX and Its not visible.

I have my NVX connected dircetly into my computer. I am struggling to make iut visible to my computer. In the manual it says I need to make sure the Subnet Masks are the same, but I cannot work out how to ensure this is happening. I have attached a screengrab of what I am looking at on RAIDar. 

 

Please help! 

 

Duncan

  •  

    If you are using the default network settings on your NAS, then it would be using 192.168.168.168 as it's IP address.  You can configure the PC to assign a static IP address on the PC NIC of 192.168.168.100, with a gateway address of 192.168.168.168 and a subnet mask of 255.255.255.0.  Then you could reach the NAS using it's IP address.

     

    Also, if you are using Windows 10, you will need to go into "turn windows features on or off", and make sure the SMB 1.0/CIFS client is installed,  Microsoft is deprecating SMB 1.0, but you need to use it with your older ReadyNAS.

     

    Posting the RAIDar help screen isn't that useful.  If RAIDar is detecting your NAS, can you show us the main screen (firmware and IP address)?  

     

     

     

     

2 Replies

Replies have been turned off for this discussion
  • StephenB's avatar
    StephenB
    Guru - Experienced User

     

    If you are using the default network settings on your NAS, then it would be using 192.168.168.168 as it's IP address.  You can configure the PC to assign a static IP address on the PC NIC of 192.168.168.100, with a gateway address of 192.168.168.168 and a subnet mask of 255.255.255.0.  Then you could reach the NAS using it's IP address.

     

    Also, if you are using Windows 10, you will need to go into "turn windows features on or off", and make sure the SMB 1.0/CIFS client is installed,  Microsoft is deprecating SMB 1.0, but you need to use it with your older ReadyNAS.

     

    Posting the RAIDar help screen isn't that useful.  If RAIDar is detecting your NAS, can you show us the main screen (firmware and IP address)?  

     

     

     

     

    • dunky76's avatar
      dunky76
      Aspirant

      Thank you so much StephenB....I did everything you mentioned and I now have access to my NVX. You're the man!! :) 

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More