NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Connectivity issues from different subnet
Recently we've been having issues with connectivity to our NAS when connecting from another subnet. We have two networks, 192.168.5.x and 192.168.10.x, and the NAS is on .5.x. Users on .5.x have ze...
I understand that you suspect that the antivirus feature of the gateway you use may be the root cause in how it checks cifs/smb packets.
Is the gateway address on the NAS correct (255.255.255.0)? I'm also wondering if you might have an IP address conflict.
If those are ruled out, then it seems more likely to be a router or switch issue. Do you have any way to gather stats on the connection path? If not, you could try running an extended ping test of the NAS from the 10.x subnet..
Gateway is correct, as users on the .10.x network do see the nas. It is just when opening or modifying files do these issues occur.
I ran a ping test from that network overnight and the highest ping time I saw was 102ms with the majority being <1ms-3ms and an occasional one in the teens and 20 ms range.
PipingRockIT wrote:
Gateway is correct, as users on the .10.x network do see the nas. It is just when opening or modifying files do these issues occur.
Understood. But the router (or switches) on the path could be creating some packet loss that is only seen by the .10.x network users.
Are you using bonding in the NAS?
PipingRockIT wrote:
I ran a ping test from that network overnight and the highest ping time I saw was 102ms with the majority being <1ms-3ms and an occasional one in the teens and 20 ms range.
Perhaps also run that test during working hours.
Perhaps also send in your logs (see the Sending Logs link in my sig)
Sent logs per your link
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
