NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
corrupt root on rnd2000 v2
Hi there, So i have a RND2000v2 (says so on the bottom of the unit) Last time i powered it... almost 1.5 years ago, since then i`ve removed the old disks and never did power it up since. ...
ok so i found this page http://kb.netgear.com/24874/How-do-I-access-the-boot-menu-on-my-ReadyNAS-Duo-NV-NV-X6-or-600
and finally made my unit boot up and used TFTP to install a firmware
all is good :D
alios24 wrote:
So i have a RND2000v2 (says so on the bottom of the unit)
The labels don't mean what you think they mean, and the instructions you used were for the duo v1 (which uses a sparc processor), not the v2 (which uses an arm processor).
If you are running 4.1.x firmware in the NAS then you have a v1. If you are running 5.3.x you have a v2.
More info on unit identification is here: http://www.rnasguide.com/2012/01/09/how-to-tell-whether-i-have-a-duo-v1-or-duo-v2-or-nv-v1-or-nv-v2/
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
