NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

ipb_uk's avatar
ipb_uk
Aspirant
Feb 19, 2018

CPU fan speed stuck at 4218rpm

Hi,   The CPU fan seems to be stuck at 4218 & 3515 rpm. Not sure how long it's been like this but at least a week.   Room temp = 23c CPU = 45 System = 55 Disk1 = 38 Disk2 = 38 Disk3 = 37 Di...
Performance
ipb_uk's avatar
ipb_uk
Aspirant
Feb 19, 2018

It's on 6.9.2 with 6x6TB disks.

I'd forgotten about my signature as it doesn't show on my PC. Hopefully I've updated it and can bee seen by someone, I can't see it in my posts though.

ipb_uk's avatar
ipb_uk
Aspirant
Feb 19, 2018

Of course the sig. shows silly me.....

  • Sandshark's avatar
    Sandshark
    Sensei
    Feb 20, 2018

    Sounds like a configuration error.  If you have SSH enabled, please post the contents of ./etc/sensors.d/system.conf.

    • ipb_uk's avatar
      ipb_uk
      Aspirant
      Feb 20, 2018

      Contents is......

       

      chip "colabel temp2 "CPU"
      compute temp2 @%35, @%35
      ignore temp3
       
      chip "w83627dhg-isa-*"
      label in1 "DDB18"
      set in1_min 1.62
      set in1_max 1.98
       
      set in2_min 3.3 * 0.90
      set in2_max 3.3 * 1.10
      label in3 VCC3
      set in3_min 3.3 * 0.90
      set in3_max 3.3 * 1.10
      label in4 VCC1_25
      set in4_min 1.17
      set in4_max 1.32
      label in5 "VCC1_5"
      set in5_min 1.41
      set in5_max 1.58
      label in6 "VCC1_05"
      set in6_min 0.98
      set in6_max 1.10
      set in7_min 3.3 * 0.90
      set in7_max 3.3 * 1.10
      set in8_min 3.0 * 0.90
      set in8_max 3.3 * 1.10
      label fan1 "System"
      set fan1_min 600
      label fan2 "CPU"
      set fan2_min 150
      label fan3 "System"
      set fan3_min 600
      ignore fan4
      ignore fan5
      label temp1 "System"
      set temp1_max 80
      ignore temp2
      ignore temp3
      ignore cpu0_vid
      ignore intrusion0 
       

       

       

      • Supertramp11's avatar
        Supertramp11
        Luminary
        Feb 20, 2018

        I ran 6.9.1 and currently run 6.9.2 on my PRO 6 coming from 6.5.0 and I have to say that the fans never worked better than with 6.9.x.

        This is not an immediate help to resolve your problem, but I thought I share this.

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More