NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Crashplan for Dummies, aka Step by Step :)
I have just went through this and have seen several folks post that they wish there was an all inclusive guide, I just bought a Pro 2 and so far I am pleased with what I see under the hood (looks like...
I followed the guide in the OP and have had CP 3.0.3 running for a while now without issues. Will it auto update the Linux version on our NAS?
A few days ago in my backup status email I noticed that my backup was not complete any more and the next report showed that it was even more behind. When I checked on the history from the CP client it was showing that the CP service was starting and stopping multiple times a min. I am not Linux man so I figured I would try to uninstall CP from the NAS (I did not do the full uninstall where you clear out the config files) and then install 3.2.1. That went without hitch. I rebooted the NAS after that and then connected with the client. It took about 5 hours for the NAS to verify all of the data with what was already backed up to the CP cloud. I have 3 backup sets and it completed 2 of them and then the client dropped. I reconnected and checked the history and this is what I see:
So it looks like it is having a hard time keeping the CP service running on the NAS. I am on RAIDiator 4.2.21, Memory: 4096 MB [4-5-5-18 DDR2], Volume C: Online, X-RAID2, 6 disks, 77% of 7404 GB used. The services I have installed are CP, Nas Monitor 3.3, PHP+Mysql Support 1.4, ReadyNAS Remote, v1.0.9.78, uTorrent 2.2.02 (not running).
Any advice on what to check for?
A few days ago in my backup status email I noticed that my backup was not complete any more and the next report showed that it was even more behind. When I checked on the history from the CP client it was showing that the CP service was starting and stopping multiple times a min. I am not Linux man so I figured I would try to uninstall CP from the NAS (I did not do the full uninstall where you clear out the config files) and then install 3.2.1. That went without hitch. I rebooted the NAS after that and then connected with the client. It took about 5 hours for the NAS to verify all of the data with what was already backed up to the CP cloud. I have 3 backup sets and it completed 2 of them and then the client dropped. I reconnected and checked the history and this is what I see:
So it looks like it is having a hard time keeping the CP service running on the NAS. I am on RAIDiator 4.2.21, Memory: 4096 MB [4-5-5-18 DDR2], Volume C: Online, X-RAID2, 6 disks, 77% of 7404 GB used. The services I have installed are CP, Nas Monitor 3.3, PHP+Mysql Support 1.4, ReadyNAS Remote, v1.0.9.78, uTorrent 2.2.02 (not running).
Any advice on what to check for?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
