NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Data Migration from NV+v1 NAS to New RN314
Current Network Setup is all Netgear Hardware: Gigabit Switch Gigabit Router Cable Modem Old NAS is ReadyNAS NV+, Firmware: RAIDiator 4.1.13, X-RAID New NAS is ReadyNAS 314, Firmware: 6.1.8, ...
JustKJ wrote: Your reply is a bit confusing to me as I am likely missing something, but you say NFS is faster, but you said to "edit the job to rsync...".
(a) Create the next backup job using NFS as the protocol. Then run it.
(b) Edit that backup job, changing the source protocol to rsync. Then run it again.
You are currently getting 3 MB/s (25 mbits, which is ~3 mbytes), this approach should get you something around 20 MB/s. Step (b) is very fast, it just ensures that permissions, etc are all aligned.
Also, when you are done, you might need to reset share and file ownership on the RN314 side. User accounts and groups generally use different UIDs and GIDs, and "nobody" and "nogroup" in particular are not aligned.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
