NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
bluewomble
Mar 13, 2011Aspirant
Disk Failure Detected...
I've recently purchased a ReadyNAS Ultra 6 along with 6 2 Tb Seagate ST2000DL003 disks (which are on the HCL). I've set up the NAS in a dual redundancy X-RAID2 configuration and have starting copyi...
bartw
May 14, 2012Aspirant
Let me shatter your hope ...
We have an U6 at a customer, with 4 of these disks (ST2000DL003-9VT166)
System failed with a bad disk 3 hours after we left it at our customer (even thug we do 48 hrs burn ins under load).
Picked the system back up, swapped drives, extended disk test, extended load test, system again OK . Install it at the customer (did the 4.2.20 upgrade there onsite), 8 hours after we leave it there 2 disk disappear ...
After a reboot one of the disks seems to come back online and a resync happens ... except , no volumes available.
Netgear, get your act together, this thread is 2 months old and we still do not have a fix ... you're loosing my confidence ...
We have an U6 at a customer, with 4 of these disks (ST2000DL003-9VT166)
System failed with a bad disk 3 hours after we left it at our customer (even thug we do 48 hrs burn ins under load).
Picked the system back up, swapped drives, extended disk test, extended load test, system again OK . Install it at the customer (did the 4.2.20 upgrade there onsite), 8 hours after we leave it there 2 disk disappear ...
After a reboot one of the disks seems to come back online and a resync happens ... except , no volumes available.
Netgear, get your act together, this thread is 2 months old and we still do not have a fix ... you're loosing my confidence ...
Related Content
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!