NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Duo v2 - single disk set up - giving corrupt boot error
Setup: 1X 2TB seagate disk Not sure how it's set up (RAID0, 5, X-RAID - not sure. But I think I must have used the default). I had this unit turned off for sometime and powered on a couple of...
ny8wolf wrote:
I ran OS reinstall again while RADar is connected and second time it gave me the set up menu to set up the disk, with the options to use XRAID2, RAID 0,1,5,6 etc.
Unfortunately you did a factory default, and not an OS reinstall. That formats the disks and does a clean install of the firmware from the flash.
So it did destroy your data. Odds of recovery are slim.
I guess you could continue to try other RAID recovery tools, and see if they can recover data. https://www.r-studio.com/ is one option. Look for versions that you do free downloads (and only pay to recover).
Thank you for your prompt reply.
I'm certain I did the OS install, (selected second LED light). But this device was turned of, powered and my 4yr old was spotted turning it on/off a several times over the last few months. I'm wondering if this did something to it?
Also, at the time I rebooted the device:
1. The power off button didn't function (two quick clicks, long press nothing worked)
2. Ping worked, admin page gave rejected message
Well that's for some more background.
Over to the recovery s/w I've been trying.. Tried the main ones without much luck but now i'm after those that mention 'Netgear and XRAID' explicitly. Few that I found are:
1. ReclaiMe
2. Hetman recovery
3. Stellar - (but this one require you to manually reconstruct the raid set up)
Thanks for your suggestion. I'll check out r-studio.
Does anyone know other threads or recovery s/w (try for free) that works on ReadyNas?
ny8wolf wrote:
I'm certain I did the OS install
The prompt to set up RAID suggests otherwise. You only get that after the factory default (there is about a 10 minute time window after the factory default begins there RAIDar will let you set the RAID mode).
Anyway, I hope you do find a tool that works.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
