NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Error while backing up w/ RSync on 4.2.12
Backing up from one NAS to another via RSync. Both brand new RN Pro BE's on 4.2.12 - oriignally Factory-defaulted on 4.2.11 w/ ext4 filesystems and dual redundancy. Getting a similar failure as ...
Just my experiences with the same problem...
I know this is long after the original post, but having just had an rsync NAS-->NAS stop working that had been working for months, I finally got it working.
I had an NV+ with 4.1.8 rsync from an Ultra 2 Plus. The connection started and I then got
Mar 8 07:13:30 xxxxxx rsyncd[3864]: rsync: read error: Connection timed out (110)
Mar 8 07:13:30 xxxxxx rsyncd[3864]: rsync error: error in rsync protocol data stream (code 12) at io.c(760) [sender=3.0.8]
I read that rsync might have been an issue so I disabled JF on both NAS and tried the backup again and it started working.
I then re-enabled them on the U2+ and it still worked then re-enabled on the NV+ and it still worked...
I know this is long after the original post, but having just had an rsync NAS-->NAS stop working that had been working for months, I finally got it working.
I had an NV+ with 4.1.8 rsync from an Ultra 2 Plus. The connection started and I then got
Mar 8 07:13:30 xxxxxx rsyncd[3864]: rsync: read error: Connection timed out (110)
Mar 8 07:13:30 xxxxxx rsyncd[3864]: rsync error: error in rsync protocol data stream (code 12) at io.c(760) [sender=3.0.8]
I read that rsync might have been an issue so I disabled JF on both NAS and tried the backup again and it started working.
I then re-enabled them on the U2+ and it still worked then re-enabled on the NV+ and it still worked...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
