NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
expanding ReadyNAS NV (RNV1-S2-0000)
Hi, all. I just bought 4x Western Digital Red WD20EFRX 2TB to expand my ReadyNAS NV from 4x 1TB disks. I'm running the latest firmware (RAIDiator 4.1.10 [1.00a043]). I've been doing a lot of re...
Can you try again. Sounds like you didn't do it correctly.
1. Power off NAS
2. Press and hold reset button
3. Briefly press power button to turn NAS on
4. Continue holding reset button. Disk LEDs will blink once after about 5 seconds and a second time after about 30 seconds. Release the reset button after the second blink
Note also that with new unformatted disks, a factory default should be done automatically if you don't use the boot menu
1. Power off NAS
2. Press and hold reset button
3. Briefly press power button to turn NAS on
4. Continue holding reset button. Disk LEDs will blink once after about 5 seconds and a second time after about 30 seconds. Release the reset button after the second blink
Note also that with new unformatted disks, a factory default should be done automatically if you don't use the boot menu
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
