Forum Discussion
Solved
Failed to update RAIDiator 4.2.31 to 6.x
Dear experts. In order to update/disable the SMB1 of the device for company security reasons today I tried to update my fantastic ReadyNas 2100 , I updater to the version RAIDiator 4.2.31 without ...
xhen wrote:
If is the V1 what can I do? I dont mind to use the version
RAIDiator 4.2.31 is not mandatory to use the OS 6
I just want to recover the device...it was really nice device, never a issue or problem
mdgm might have some ideas. My guess is that USB recovery should work. The process is here: https://kb.netgear.com/30267/RAIDiator-4-2-USB-Recovery-Tool If you try it, run usbrecovery.exe with elevated privilege (not stated in the guide).
While you can convert the 2100v2, you cannot convert the older 2100v1.
Can you confirm that the model is a v2?
I will confirm tomorrow at the office.
If is the V1 what can I do? I dont mind to use the version
RAIDiator 4.2.31 is not mandatory to use the OS 6
I just want to recover the device...it was really nice device, never a issue or problem
xhen wrote:
If is the V1 what can I do? I dont mind to use the version
RAIDiator 4.2.31 is not mandatory to use the OS 6
I just want to recover the device...it was really nice device, never a issue or problem
mdgm might have some ideas. My guess is that USB recovery should work. The process is here: https://kb.netgear.com/30267/RAIDiator-4-2-USB-Recovery-Tool If you try it, run usbrecovery.exe with elevated privilege (not stated in the guide).
I tried that tool also , but gives me error on windows 10 x64 (side-by side error) and I was unable to run and create the USB for recovery.
Edit this coment: I am trying from home and the tool worked OMG!!
in the company computers was not worked, sure a security policy!!!
I am so happy tomorrw I will try to recover with the usb created at home!!!
I will reply tomorrow
Hello everyone
finally I recovered my devide!!!
thank you so much!!!!
I see that is version 1 so as you told me I can not update to OS6 no?
Model: ReadyNAS 2100 v1 [X-RAID2] Serial: 2A5609R200XXXX Firmware: RAIDiator 4.2.31 Memory: 1024 MB [6-6-6-24 DDR2 ECC] IPv4 address: 1+2: 192.168.1.20 Volume C: Online, X-RAID2, 4 disks, 97% of 2759 GB used
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
