NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Fan Problem After Upgrading To 6.5.0
Good Evening Community Members, Today I upgraded my RN314 to the 6.5.0 firmware. I really like some of the new features that have been added however I am now getting a strange problem with my fan on...
Each time the fan jumps to a new RPM level (there are 7 possible levels based on various temperature readings), it must calibrate the fan for that RPM level once each boot. During that calibration period, which should take between a few seconds and 3 minutes, you may hear the fan speed up or slow down more than normal. But once that is done, it should be stable.
We've also made some additional changes for 6.5.1 to take advantage of some hardware capabilities which should allow use to make fan adjustments more smoothly.
Which fan mode did you have set when you ran into the problem (quite, balanced or cool)?
Can you send in your logs (see the Sending Logs link in my sig)?
Good Evening mdgm,
The fan mode was in 'Quiet' when it was going crazy.
Logs sent in as requested.
Cheers and thanks :)
We will need some extra logging to capture what's going on here. I have sent you a PM.
We've made a small modification locally on your box. Please report back if you see any more strange fan behavior.
Good Morning,
I dont know if this is related to any change that has been made, but, at 12:34am I received an alert via email indicating;
12:34am ReadyNAS Alert Message (ReadyNAS-314 System: Notice) External storage device connected.
12:34am ReadyNAS Alert Message (ReadyNAS-314 Backup: Notice) Cancelled backup job READYNAS_Documents Folder Backup
03:23am ReadyNAS Alert Message (ReadyNAS-314 System: Notice) External storage device connected.
03:39 ReadyNAS Alert Message (ReadyNAS-314 System: Notice) External storage device connected.
03:44 ReadyNAS Alert Message (ReadyNAS-314 System: Notice) External storage device connected.
All the backup jobs within the backup tab indicated yellow and cancled at 00:33:18 & 00:34:39
In the log it is indicating that ReadyNASOS service or process (journalctl) was restarted @ 00:33:12 and at 03:44:11 ReadyNASOS background service started
I dont know if this helps or not?
Cheers
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
