NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
How to configure RAID on readynas 2100
Hi, I just boought this ReadyNAS and cannot see how to configure the RAID level. I have 4 bays with 2 x 2gb and 2 x 1gb drives. Ideally I would like 2 x mirrored pairs. After resetting to factory def...
You need to get into flexraid mode - see page 48 here: http://www.downloads.netgear.com/files/GDC/RNDU2000/ReadyNAS_Business_SW_05Nov13.pdf
To do this you'll need to install the older version of RAIDar (4.3.8). Version 6.3 won't do it. https://kb.netgear.com/20684/ReadyNAS-Downloads.
You can start with just the 2x2TB drives installed if you want - and then hot-insert the 1 TB drives and create the second volume after the initial setup.
- Hi thanks for the quick response. I am using Firmware version RAIDiator 4.2.31
Is this the same as per your instructions?
ThanksYes. They didn't update the manual after 4.2.17 (the releases after that were mostly bug fixes and security patches).
The manuals (and some other stuff) are here: https://www.netgear.com/support/product/rnrx4000_(readynas_2100).aspx
- Many thanks for all your help. I have one mirrored pair syncing as we speak. Added other drives but assume it needs to finish sync before it will allow me to create another array?
Thanks
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
