NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
How to stop a resync
All ... I have a ReadyNAS duo v1 on which I started a resync, with a data drive and an "empty" disk. My error, of course, was to load the "empty" in bay 1 and the data disk in bay 2. When I dis...
Hi Knorske,
Which RAID is running in your existing volume (data drive)? Turn off the NAS and remove both disks. Put back the data drive where it was originally slotted into and boot it up. If it loads up fine with your data and Frontview being accessible, add the 2nd disk (clean) then wait for the resync process to complete.
Kind regards,
BrianL
NETGEAR Community Team
Hi Knorske,
Which RAID is running in your existing volume (data drive)? Turn off the NAS and remove both disks. Put back the data drive where it was originally slotted into and boot it up. If it loads up fine with your data and Frontview being accessible, add the 2nd disk (clean) then wait for the resync process to complete.
Kind regards,
BrianL
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
