NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Length of Scrub Maintenance
I have an RN104 with 4 4TB drives it has around 3.5TB free of 10.9TB. I have not run maintenance in a while so am going to go throught them one by one I started Scrub last night and after 12 hou...
It takes about 32 hours on my RN526 (which has a 4x6TB array). That's bigger than your array, but the RN526 is much faster than your RN104.
There are two steps involved - a btrfs scrub command, followed by a software raid (mdadm) scrub. The second step requires reading every block in the RAID array (even free space). So it will take a while.
It takes about 32 hours on my RN526 (which has a 4x6TB array). That's bigger than your array, but the RN526 is much faster than your RN104.
There are two steps involved - a btrfs scrub command, followed by a software raid (mdadm) scrub. The second step requires reading every block in the RAID array (even free space). So it will take a while.
StephenB,
Thanks for the timeframe. Now that my RN424 is up and running, want to get my RN104 maintained and onto the latest firmware.
Your input on these forums is much appreciated.
Thanks,
BJB
Thanks for the timeframe. Now that my RN424 is up and running, want to get my RN104 maintained and onto the latest firmware.
Your input on these forums is much appreciated.
Thanks,
BJB
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
