NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Migrating NV Disks after PSU failure
Have a ReadyNAS NV for a number of years that had a PSU failure (hot, funky smell and rebooting) and the unit was covered under the service bulletin. I had expected Netgear to send me a PSU to s...
One addititional update. I turned off the unit, put back in the single old disk I used for updating the firmware the other day and booted up. It booted up, though with only one disk is says the xraid failed to start. I tried updating the firmware again over the old one. then rebooted the unit. I then reinstalled the 3 data disks. Rebooted. It started with FS check. I went to bed when it was around 12%. Radar could see the progress of FS check, though it couldn't access setup. It finished the FS and sent an e-mail raid sating sync started around 2:00 am. At 8:00 am this morning, it is still booting, blue light pulsing slowly, activity light speeding along, all three disk lights lit, screen says booting.... but radar can't access the system. I'm out of ideas.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
