NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Need help with XRaid2 problem on ReadyNAS Pro running RAIDiator 4.2.31
It is of course my own fault for not having a backup but the following happened. I had a 6 bay ReadyNAS pro as above running RAIDiator 4.2.31 with six 4TB drives. Whilst the logs showed an increa...
I am at this stage far less concerned with storage expansion and may indeed look at v6 later for that.
Steve, as I indicated vgscan is not finding a volume i.e. c and hence it is not possible to do vgchange or mounting. Also (not mentioned) likely for the same reason there is no /dev/c/c/ device
You might have been confused by my referring to the fact I have a second identical but working unit and it does list the c volume and have a /dev/c/c/
jelockwood1 wrote:
I am at this stage far less concerned with storage expansion
Understood. I raised the expansion issue in the first post, because the failed expansion might complicate recovery efforts.
You might have better luck with the 4 larger disks + the original disk 6. The volume would be out of sync no matter what you do, so that it is part of the puzzle.
Though honestly I think your best option is recovery software.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
