NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear ReadyNas Duo V2 - no disks detected
Hi I have a ReadyNas Duo V2 with a 2TB installed. This device has worked absolutley perfectly with no issues for a number of years UNTIL TODAY. I was streaming some media from the device and all of...
Hi Stephen
The NAS is definitely a v2 and is running the latest firmware.
In regards to the blinking, on boot the power light comes on and then the activity light constantly blinks. No other lights blink.
Can I use a SATA to USB to connect the hard drive to my Windows laptop.
Thanks for the help.
Thank you
Uwais
The NAS is definitely a v2 and is running the latest firmware.
In regards to the blinking, on boot the power light comes on and then the activity light constantly blinks. No other lights blink.
Can I use a SATA to USB to connect the hard drive to my Windows laptop.
Thanks for the help.
Thank you
Uwais
uwaisrehman wrote:
Can I use a SATA to USB to connect the hard drive to my Windows laptop.
Yes.
- Is there anyway of reviving the NAS?
Previously it was working perfectly. No idea what caused the fault
uwaisrehman wrote:
Previously it was working perfectly. No idea what caused the faultThe chassis isn't repairable - the only thing that can be replaced is the power adapter.
But based on the info you provided, I think it's likely that the NAS is ok, and the disk failed.
If you have a spare disk (with no useful data on it), you could try inserting it into the NAS, and see if it is detected or not.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
