NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear RN2120v2
Not able to ping the device (RN2120v2).earlier it was working fine
You have a rackmount model? What firmware was the NAS running?
What LED status are you seeing? (see pages 14ff here: http://www.downloads.netgear.com/files/GDC/RN2120/ReadyNAS_OS6_Rackmount_HWM_EN.pdf )
Ok, so I hope you realize your statement is about as descriptive as "my car was runing this morning, now it's not -- what's wrong?"
A little more detail will go a long way in helping us help you figure out the problem. Any LEDs lit (front and NIC in the rear)? Fan sound normal? Anyting at all you did, or is on a schedule to be done, from working condition to not? Any changes in network configuration?
Hi
As per manual,LED status indicting OK status for hardware.No change has been performed for the network configuration.Fan sound is normal.
What is the status of the ethernet LED (both on the NAS and the switch/router)?
Have you tried using RAIDar to detect the NAS status? https://kb.netgear.com/20684/ReadyNAS-Downloads#raidar
Is the NAS still covered by warranty?
No warranty covered is expired.
The status of LED as per manual is normal.
No i didnt try the same with RAIDrar.dont know how to use it.
Please guide me
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
