NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
No access to readynas(104) after upgrade 6.4.1 ....
Hello,
Since the 6.4.1 update my readynas remains on the message " booting ..." with the Activity LED Fixed and the LED on/off flashing slowly. A ping from the pc has a positive return, but the ad...
Hello,
After contact with the support, the cause was found. Too many snapshots this causing a malfunction during the update tio 6.4.1. By against impossible delete snapshots it took after the NAS starts in read-only mode, back up all data and perform a factory reset in version 6.4.1. At the restart, and after verifying the reynchronisation volume, the NAS is fully operational again.
Thank you to the Netgear support for assistance.
I bought a RN 104 april 2014 and loaded it with 4 x 4TB Seagate NAS disks, to form a RAID 5 volume. It has worked fine ever since. Last Friday, I upgraded from the earlier firmware (did not check which) to 6.2.5 then on to 6.4.1. Now I only get a "page_address+8" message, no admin web access, no file sharing and I have had it on for over 24 hours. Have I lost my RN 104 and all the data there (about 5 to 6 TB of personal data)? Is there some way to downgrade the firmware? Or to upgrade to later firmware, even if Beta? How do I get access to it?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
