NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Pro - no new space after disk change - Case nr: 20382528
Hi. I have ReadyNAS Pro (6350) with 3x500GB. X-RAID2 with single redundancy. Last week I bought 2x1TB disks and found 3x1.5TB disks. So I started my expansion like this: 0. Slot 1,2,3 was oc...
disk!!1!!status=ok::descr=Channel 1: ST31500341AS 1397 GB, 36C/96F
disk!!2!!status=ok::descr=Channel 2: ST31500341AS 1397 GB, 38C/100F
disk!!3!!status=ok::descr=Channel 3: ST31500341AS 1397 GB, 36C/96F
disk!!4!!status=ok::descr=Channel 4: ST1000NM0011 931 GB, 32C/89F
disk!!5!!status=ok::descr=Channel 5: ST1000NM0011 931 GB, 31C/87F
5 disks, 3 1.5 TB and 2 1 TB drives.
===== lvscan =====
ACTIVE '/dev/c/c' [2.25 TB] inherit
You're showing as 2.25 TB, so I investigated further. It does not appear that md4 was created to make a new RAID using the additional 465.8 GB.
***** partition output for sda *****
Disk /dev/sda: 2930277168 sectors, 1.4 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): 72773AE8-8385-4C96-8589-E53F65433ACC
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 2930277134
Partitions will be aligned on 8-sector boundaries
Total free space is 976756141 sectors (465.8 GiB)
The expansion log shows that it is trying to expand the volume also using the two disks that are not 1.5 TB.
It's strange -- your ReadyNAS should have md4 and that should take care of the additional space, and md3 should incorporate all 5 disks, but it only lists the last 2 disks you put in.
I would recommend calling into support and opening a case so we can fix this.
disk!!2!!status=ok::descr=Channel 2: ST31500341AS 1397 GB, 38C/100F
disk!!3!!status=ok::descr=Channel 3: ST31500341AS 1397 GB, 36C/96F
disk!!4!!status=ok::descr=Channel 4: ST1000NM0011 931 GB, 32C/89F
disk!!5!!status=ok::descr=Channel 5: ST1000NM0011 931 GB, 31C/87F
5 disks, 3 1.5 TB and 2 1 TB drives.
===== lvscan =====
ACTIVE '/dev/c/c' [2.25 TB] inherit
You're showing as 2.25 TB, so I investigated further. It does not appear that md4 was created to make a new RAID using the additional 465.8 GB.
***** partition output for sda *****
Disk /dev/sda: 2930277168 sectors, 1.4 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): 72773AE8-8385-4C96-8589-E53F65433ACC
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 2930277134
Partitions will be aligned on 8-sector boundaries
Total free space is 976756141 sectors (465.8 GiB)
The expansion log shows that it is trying to expand the volume also using the two disks that are not 1.5 TB.
It's strange -- your ReadyNAS should have md4 and that should take care of the additional space, and md3 should incorporate all 5 disks, but it only lists the last 2 disks you put in.
I would recommend calling into support and opening a case so we can fix this.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
